TERMODUR

CATEGORY MIROMIX
TINTING
SYSTEM		 TYPE ASPECT EFFECT APPLICATION HARDENING
    Antir.
Phosph.Zn		 Base Finish   Micaceous Metalized Embossed Hammered Iron Galvanized
LIGHT
ALLOYS 		Fibreglass
plastic 		Yes To
taste
Furnace SI SI SI SI GLOSS- SEMI GLOSS SI SI SI SI SI SI SI SI SI

Thermosetting finish that can be dried in the furnace (120° - 140°C for 30' - 20'). Endowed with an excellent direct anchorage to raw plate and resistance to scratches. It was designed to be applied on electrostatic plants.

Utilization fields
Light carpentry
Telephony
Electronics
Furniture
Specific weight
1100 - 1300 g/l
Solids in weight
55% - 66%
Hardening
-
Thinning
Up to 20% in weight with thinner "F" RV1881
Application viscosity
18" - 25" Ford 4
Pot-Life at 20°C
-
Drying
DRYING IN OVEN: 140°C :20' 130°C: 30'
Theoretic Performance
13 - 15 meters (square)/kg
Colour
VARIOUS
Application method
AIRLESS
AIRMIX
Application conditions
Temperature + 5°C - +40°C Relative humidity
Surface preparation
-
Storage
Six months in cool ventilated place
Hygienic and security regulations
During application, it is advisable to stay in well-ventilated environment and to use protective masks.
Warnings and specifications
A specific technical data sheet for each product is available on demand. This can be requested when placing the order.

The numbers in this data sheet are subject to normal variations related to production, application methods, atmospheric conditions, wet film thickness and structure complexity.

The company is not liable to any responsibility on results that can derive even from factors that do not depend on the quality of the products.

Data refer to the standards in force on the date in which they are printed. The company reserves itself the right to amend them without notice.